EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 150
4.3.9.2 COVER, CR
1. Remove the HOUSING, UPPER. (p106)
2. Remove the two screws that secure the COVER, CR and remove it.
One C.B.P. 3 x 6 screw (9 ± 1 kgf.cm)
One C.B.S. 3 x 6 screw (9 ± 1 kgf.cm)
Figure 4-79. Removing the COVER, CR
C A U T I O N
The following are important points when installing the COVER,
CR.
Before screwing the unit, make sure that the cables are not
trapped.
As different types of screws are used, make sure to reinstall the
correct type of screws at the correct positions.
Overhead view
COVER, CR
C.B.P. 3x6
C.B.S. 3x6
To Next Page
Loading...
