Epson 3800 - Stylus Pro Color Inkjet Printer - Page 159

EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 159
4.3.9.5 PRINT HEAD
1. Remove the HOUSING, UPPER. (p106)
2. Remove the COVER, CR. (p150)
3. Perform step 13. to step 16. in “4.3.9.3 INK, SYSTEM, ASSY.” (p151) to remove
the SELECTOR, INK, ASSY. from the CARRIAGE, ASSY.
4. Remove the screw that secures the MOUNTING PLATE, SELECT, INK and
remove it.
See Figure 4-89.
 One C.B.P. 2.5 x 8 screw (3 ± 1 kgf.cm)
5. Remove the EXTENSION SPRING, 5.63 from each hooked tab on the
CARRIAGE, ASSY. and the LEAF SPRING, LOCK, HEAD.
See Figure 4-90.
Figure 4-89. Removing the MOUNTING PLATE, SElECT, INK
Figure 4-90. Removing the EXTENSION SPRING, 5.63
Insert the rib of the PRINT HEAD into the cutout of the
MOUNTING PLATE, SELECT, INK to secure the MOUNTING
PLATE, SELECT, INK.
C.B.P. 2.5x8
positioning point
MOUNTING PLATE,SELECT,INK
hooks
CARRIAGE, ASSY.
EXTENSION
SPRING, 5.63
LEAF SPRING,
LOCK, HEAD