EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 158
4.3.9.4 POROUS PAD, TRAY, INK EJECT
1. Remove the HOUSING, UPPER. (p106)
2. Remove the INK, SYSTEM, ASSY. (p151)
3. Remove the POROUS PAD, TRAY, INK EJECT from the TRAY, INK EJECT.
Figure 4-88. Removing the POROUS PAD, TRAY, INK EJECT
A D J U S T M E N T
R E Q U I R E D
Whenever the POROUS PAD, TRAY, INK EJECT is replaced,
the corresponding adjustments must be carried out.
See Chapter 5 "ADJUSTMENT" (p190).
TRAY, INK EJECT POROUS PAD, TRAY, INK EJECT
To Next Page
Loading...
