EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 2) 182
Be sure to position the notch of the FLAG, DETECTOR,
RELEASE and the red marking part of the SPUR GEAR, 22, B
as shown in the figure below to install the MOTOR, RELEASE,
ASSY.
Route the cables correctly as shown in the figure below.
SPUR GEAR, 22, B
FLAG, DETECTOR, RELEASE
positioning point
cable of MOTOR ASSY., PF
cable of MOTOR
ASSY.,RELEASE
Adjust the length of the cables
and secure them with cable hooks.
To Next Page
Loading...
