Epson 400 Series User Manual

Setting Up the Projector 21
Turning On the Projector
1. If this is your first time using the projector, remove the
protective lens pad.
2. Remove the lens cap.
3. Turn on any connected equipment you plan to use.
4. Turn on the power switch on the back of the projector.
5. Press the
On button on the remote control, or press the Power button on the projector.
Power switch
Turn on the projector
PowerLite Cinema 400.book Page 21 Friday, July 7, 2006 2:24 PM

Epson 400 Series Specifications

General

Display Technology	3LCD
Contrast Ratio	15, 000:1
Zoom	1.2x
Output Ports	VGA
Noise Level	37 dB (Normal Mode), 28 dB (ECO Mode)
Connectivity	USB
Input Ports	USB, VGA