26 Making Basic Adjustments
Focusing and Zooming
Sharpen or reduce the focus using the focus ring.
Zoom into or out of the picture using the zoom ring.
Choosing the Aspect Ratio
In many cases, video signals are automatically resized to fit
on your screen when
Auto is selected as the Aspect setting.
You may need to change the size of the image (or aspect
ratio) for certain image types by pressing the
Aspect
button on the remote control.
If your video source is connected to the HDMI, S-Video,
or Video port—or the Input A port when it is outputting
525i or 525p signals—select
Auto to automatically display
your image in the correct size.
Wide
Tele
Focus ring Zoom ring
Aspect
button
PowerLite Cinema 400.book Page 26 Friday, July 7, 2006 2:24 PM
To Next Page
Loading...
Need help?
General
