Epson 400 - Page 101

White horizontal lines appear in the printed image.
Cause What to do
The print head nozzles are
clogged.
Clean the print head. See “Cleaning
the Print Head” later in this chapter.
One of the ink cartridges is
low on ink.
Check the control panel to confirm
that the
B
or
A
ink out light is
flashing, and replace the appropriate
ink cartridge.
The MicroWeave option in
your printer driver is off.
Turn on
MicroWeave
in your printer
driver’s More Settings dialog box.
The Media Type setting on
the Main menu of the printer
driver is incorrect.
Make sure the Media Type setting
matches the type of paper loaded in
the printer. See page 3-12.
Vertical lines do not align.
Cause What to do
The print head is misaligned. Align the print head with the Print
Head Alignment utility. See “Aligning
the Print Head” later in this chapter.
The printing position is
misaligned.
Make sure the
High Speed
option in
your printer driver’s More Settings
dialog box is not selected.
L
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 6
06-02-97 DR, pass 0
6-18
Troubleshooting