Loading Envelopes
When printing on envelopes, please note the following:
❑
You can load up to 10 envelopes into the sheet feeder.
❑
Load envelopes flap edge first with the flap side down, as
shown below.
❑
Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printing.
❑
Select
Plain Paper
as the Media Type setting on the printer
driver’s Main menu. For more details on making printer
driver settings, see online help.
❑
If ink smears on your documents, set the adjust lever to the
”+” position. To change the setting, open the printer cover
and reposition the lever. See the illustration on page 4-6.
Note:
Return the adjust lever to the “0” position, which is the normal
position, after you finish printing on envelopes. Leaving the lever in
the “+” position may cause the printed image to have gaps on other
media.
h22-e2
L
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 4
05-20-97 DR, pass 0
4-6
Printing on Special Paper
To Next Page
Loading...
