Understanding the Despooler
When you send a print job to the printer, the EPSON Despooler
dialog box appears in the lower right portion of your screen.
This box shows the progress of the current print job and
provides printer status information.
You can control printing from the Despooler dialog box using
the stop, pause, and reprint buttons as explained below.
Stop Cancels printing
Pause Pauses printing until you press it again
Reprin Opens a dialog box that allows you to
choose to restart printing from the current
page, reprint the whole document, or
hold the document for printing later
The Status Monitor at the bottom of the Despooler dialog box
only appears if you are using Windows 95.
dispol1
L
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 3
06-02-97 DR, pass 0
3-18
Using the Printer Software
To Next Page
Loading...
