To replace an ink cartridge, follow these steps.
1. Make sure the printer is on. Determine which cartridge
needs to be replaced as indicated by the
B
black or
A
color
ink out light.
Note:
If you need to replace an ink cartridge when the
B
and
A
ink out
lights are off, see page 6-28.
2. Make sure the printer is paused and the output tray at the
front of the printer is lowered; then open the printer cover.
3. Hold down the
R
cleaning button for three seconds until
the
print head moves left slightly to the cartridge replacement
position, and the
P
power light flashes when the print
head is in position.
Note:
❑
The printer automatically moves the print head back to its
home (far right) position after about 60 seconds if you have
not started the replacement procedure.
❑
If you hold down the
R
cleaning button when both
B
and
A
ink out lights are off, the printer starts cleaning the print
head.
c
Caution:
Do not move the print head by hand. Always use the
R
cleaning button to move it. Otherwise you may damage
the printer.
5
Maintenance
R
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 5
06-02-97 DR, pass 0
Maintenance and Transportation
5-3
To Next Page
Loading...
