Epson Aculaser c9100 Setup Guide

4 Installing Consumables
Photoconductor Unit
1. Pull the lever inside the handle and turn the handle to
the guideline marked with the icon.
2. Hold the handle of the intermediate transfer unit, and
gently pull it out until it stops. Make sure that the d mark
of the intermediate transfer unit matches that of the
printer.
3. Hold the handle of the orange colored protective
material and pull it out while raising it.

Epson Aculaser c9100 Specifications

General

Brand	Epson
Model	Aculaser c9100
Category	Printer
Language	English