Safety Instructions v
❏ Never push objects of any kind through cabinet slots as they may
touch dangerous voltage points or short out parts that could result
in a risk of fire or electric shock.
❏ Never spill liquid of any kind on the printer.
❏ Except as specifically explained in the printer’s documentation,
do not attempt to service this product yourself. Opening or
removing those covers that are marked
Do Not Remove may
expose you to dangerous voltage points or other risks. Refer all
servicing in those compartments to a qualified service
representative.
❏ Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in
damage and may require repair by a qualified service
representative.
Safety Information
Power cord
c
Caution:
Be sure the AC power cord meets the relevant local safety
standards.
Use only the power cord that comes with this product. Use of the
another cord may result in fire or electric shock.
This product’s power cord is for use with this product only. Use with
other equipment may result in fire or electric shock.
For Singapore Users:
Replace fuses only with a fuse of the correct size and rating.
Laser safety labels
w
Warning:
The performance of procedures and adjustments other than
those specified in the printer’s documentation may result in
hazardous radiation exposure.
Your printer is a Class 1 laser product as
defined in the IEC60825 specifications.
The label shown is attached to the back
of the printer in countries where
required.
To Next Page
Loading...
Need help?
General