Epson AcuLaser M1400 Series - Setting the Time for the Power Saver Mode; Exiting the Power Saver Mode

Setting the Time for the Power Saver Mode
You can specify the time for the Power Saver mode. The printer switches to the Power Saver mode after
the specified time.
The following procedure uses Microsoft
®
Windows
®
XP as an example.
1. Click start — All Programs — EPSON — EPSON AL-M1400 — Printer Setting Utility.
Note:
The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Maintenance tab.
3. Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4. Specify Low Power Timer and Sleep Timer in Power Saver Timer.
5. Click the Apply New Settings button to take effect.
Exiting the Power Saver Mode
The printer automatically exits the Power Saver mode when it receives a job from a computer. To
manually exit the Power Saver mode, press the button on the operator panel.
Epson AcuLaser M1400 Series User’s Guide
Basic Operation 15