Printing Problems
Problem Action
Printer stops during print job. Check if the message appears on the Printer Status window. If the “Cooling Down
Wait for a few minutes” message appears, the printer is cooling down because the
printer temperature is too high. Please wait a few minutes.
After the printer cools down, the printing will restart.
Job did not print or incorrect characters
printed.
Ensure that the
(Ready) LED is lit.
Ensure that print media is loaded in the printer.
Verify that you are using the correct print driver.
Ensure that you are using the correct USB cable and that it is securely connected to
the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Epson AcuLaser M1400 Series User’s Guide
Troubleshooting 68
To Next Page
Loading...
