Epson AcuLaser M1400 Series User Manual

Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Protrudent/Bumpy Paper
Problem Action
Printed surface got protrudent/bumpy. Clean up the fusing unit.
1. Load one sheet of paper on the multipurpose feeder (MPF), and then print a solid
image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Other Problems
Problem Action
Condensation has occurred inside the
printer.
This usually occurs within several hours after you heat the room in winter. This also
occurs when the printer is operating in a location where relative humidity reaches
85% or more. Adjust the humidity or relocate the printer to an appropriate
environment.
Epson AcuLaser M1400 Series User’s Guide
Troubleshooting 79

Epson AcuLaser M1400 Series Specifications

General

Brand	Epson
Model	AcuLaser M1400 Series
Category	Printer
Language	English