Epson AcuLaser M1400 Series - Light Sequences

LED Off On Fast Blink Slow Blink
2Ready —
1
2
Light Sequences
The following table shows the light status.
12Printer Status
Error Ready
—
Ready
The toner is low.
See Also:
“Replacing the Toner Cartridge” on page 82
—
Downloading
Warming up after power on
Receiving data, Waiting for data, Printing
Printing when the toner is low.
See Also:
“Replacing the Toner Cartridge” on page 82
Returning from Sleep mode
—
In Power Saver mode
See Also:
“Power Saver Mode” on page 14
Epson AcuLaser M1400 Series User’s Guide
Using the Operator Panel 55