Conserving Supplies
You can change several settings in your print driver to conserve toner and paper.
Supply Setting Function
Toner cartridge
Toner Saving Mode in the
Graphics tab of the print
driver
This check box allows the users to select a print mode that uses
less toner. When this feature is used, the image quality will be
lower than when it is not used.
Print media
Multiple Up in the Layout
tab of the print driver
The printer prints two or more pages on one side of a sheet.
The available numbers that each print driver can print one
sheet of paper are as follows:
❏ Windows Print Driver: 2, 4, 8, or 16 pages
❏ Mac OS
®
X Print Driver: 2, 4, 6, 9 or 16 pages
Combined with the duplex setting, Multiple Up allows you to
print up to 32 pages on one sheet of paper. (16 images on the
front and 16 on the back)
Checking Page Counts
The total number of printed pages can be checked by printing a System Settings page. The total
number of printed pages is shown on the Print Volume section, classified by paper sizes.
Single side print (including N-Up) is counted as one job, and 2-sided print (including N-Up) is
counted as two. During 2-sided printing, if an error occurs after one side is printed properly, it is
counted as one.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page. However, when doing 2-sided
printing for odd number of pages, the blank page inserted to the rear side of the last odd page is not
counted.
Note:
Refer to “Printing a System Settings Page” on page 52 for details on how to print a System Settings page.
Epson AcuLaser M1400 Series User’s Guide
Maintenance 90
To Next Page
Loading...
