4. Lower the levers to their original position.
5. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
6. Load a print media on the multipurpose feeder (MPF) if there is no print media.
7. Launch the Printer Setting Utility, click Jam Recovery on the Printer Maintenance tab.
8. Click the Start button.
The print media is fed to push out the jammed paper.
Epson AcuLaser M1400 Series User’s Guide
Troubleshooting 63
To Next Page
Loading...
