Epson AL-M310DN User Manual

Item Explanation
001 Plain Adjusts the print quality for plain paper according to paper type.
Settings (default in bold):
1: Plain paper
2: Semi-thick paper
020 Special Adjusts the print quality for special paper according to the paper type.
Settings (default in bold):
0: Thin paper
1: Plain paper
2: Semi-thick paper
3: Letterhead
4: Thick paper
5: Extra-thick paper
6: Super-thick paper
7: When printing graph patterns, etc., on paper that is damp or paper that has been left out
for a long time
8: When printing graph patterns, etc., on paper that is even damper or paper that has been
left out for an even longer time than in 7
9: When you want to reduce the effects that hole punches have on images
10: When you want to reduce the effects that hole punches have on images even more
than in 9
051 Feed Offset Do this adjustment after you have eliminated the variation between the paper sources by
055/059/063/067/071/075
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
052 Scan Offset Do this adjustment after you have eliminated the variation between the paper sources by
056/060/064/068/072/076.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
053 Feed Offset2 Do this adjustment after you have eliminated the variation between the paper sources by
057/061/065/069/073/077.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when printing on
the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Appendix
107

Epson AL-M310DN Specifications

General

Brand	Epson
Model	AL-M310DN
Category	Printer
Language	English