Solving Multi-Projection Problems
26
a
Press the [Color Mode] button on the remote control, and then select
Multi-Projection as the Color Mode.
b
Use the following features to match the color differences. See your
projector's User's Guide and Installation Guide for details.
• Multi-Projection > Color Uniformity
• Operation > Light Source Brightness Control
• Multi-Projection > Color Matching
• Multi-Projection > Black Level
• Image > RGBCMY
Adjusting an Image Area
If you see black bands in the projected screen, try the following steps until the
problem is solved. You can use this solution when you combine the projected
images from two projectors and use the interactive features.
a
Press the [Menu] button on the remote control, and then select Signal
I/O > EDID.
To Next Page
Loading...
