Epson BrightLink 1485Fi - Details of Updated Projector Menus (Version 1.50)

Details of Updated Projector Menus (Version 1.50)
8
Refer to these sections for details about projector menu changes.
gg Related Links
• "Image Enhancement" p.8
• "EDID" p.8
• "HDMI Out Intensity" p.9
• "Audio Output and HDMI Audio Output" p.9
• "Auto Power On" p.10
• "Wireless LAN system" p.10
• "Projector Keyword" p.11
• "Interrupt Connection" p.11
• "ECO Menu" p.11
• "Firmware Update" p.11
Image Enhancement
The Image Preset Mode setting is added and related settings are gathered
under the Image Enhancement setting.
Previous Image Menu (Version 1.00)
Top menu Sub menu Items or setting values
Image Noise Reduction —
MPEG Noise Reduction —
Deinterlacing —
Super-resolution —
Detail Enhancement —
New Image Menu (Version 1.50)
Top menu Sub menu Items or setting values
Image Image Enhancement Image Preset Mode
Noise Reduction
Top menu Sub menu Items or setting values
MPEG Noise Reduction
Deinterlacing
Super-resolution
Detail Enhancement
The Image Preset Mode setting allows you to select the Image Enhancement
options collectively with preset values.
EDID
The EDID settings for individual input sources are added. You can select the
EDID setting for each source without changing the input source.
Previous Signal I/O Menu (Version 1.00)
Top menu Sub menu Items or setting values
Signal I/O EDID —
Selected EDID is applied to the current input source.
New Signal I/O Menu (Version 1.50)
Top menu Sub menu Items or setting values
Signal I/O EDID HDMI1
HDMI2
HDMI3
HDBaseT
Selected EDID is applied to the specified source regardless of the current
input source.