Features of Firmware Version 2.00
6
Refer to these sections for a summary of the updated features of projector
firmware version 2.00.
gg Related Links
• "Updates to Projector Menus (Version 2.00)" p.6
• "Updates to User Operations (Version 2.00)" p.6
Updates to Projector Menus (Version 2.00)
The following projector menus have changed in firmware version 2.00:
Display menu
• The Sort Source Thumbnails setting is added.
• The Menu Color setting is added.
Management menu
• The icon is added to the Language setting.
Interactive menu
• The Toolbar Color setting is added.
gg Related Links
• "Sort Source Thumbnails" p.18
• "Menu Color and Toolbar Color" p.18
• "Language" p.18
Updates to User Operations (Version 2.00)
The following projector operations have changed in firmware version 2.00:
• You can use several geometry correction types in combination.
• When you change the HDMI Out Setting, restarting the projector is
recommended.
• The Schedule settings reset to the default settings when you use the Reset
Management or Reset All option.
• You can use the computer interactive feature while projecting Screen
Mirroring source.
• You can output HDCP-disabled Screen Mirroring image to HDMI Out
port.
• You can check the IP address of the projector that receives shared screen by
displaying a screen sharing guidance screen.
gg Related Links
• "Combination of Geometry Correction" p.19
• "Change HDMI Out Setting" p.19
• "Reset Schedule Setting" p.19
• "Computer Interactive Mode for Screen Mirroring Source" p.19
• "Outputting Screen Mirroring Image to HDMI Out Port" p.20
• "Screen Sharing Guidance Screen for Receiving Projector" p.20
To Next Page
Loading...
