Epson BrightLink 425Wi - Assemble the Wall Mount

22
2. Assemble the wall mount
1. Attach the adjustment unit to the arm unit.
2. Secure temporarily using the hexagonal wrenches (M4 and M8) and M4 × 12 mm hexagon socket
head cap bolt and M8 × 15 mm hexagon socket head cap bolt.
3. Attach the arm plate using a hexagonal wrench (M8) and four M8 × 12 mm hexagon socket head
cap bolts.
Arm unit
Adjustment unit
M8 × 15 mm hexagon socket head cap bolt
M4 × 12 mm hexagon socket head cap bolt
Arm plate
M4 × 12 mm hexagon
socket head cap bolt (×4)
Installation.book Page 22 Monday, February 13, 2012 4:23 PM