28
5. Firmly tighten the screws on the arm unit and adjustment unit using the hexagonal wrenches (M4
and M8).
12. Attach the interface cover bracket
Attach the interface cover bracket using the hexagonal wrench (M4) and two M4 × 12 mm bolts with
washers.
Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal
injury or property damage.
Warning
M4 × 12 mm hexagon
socket head cap bolt
with washer (×2)
Interface cover bracket
Installation.book Page 28 Monday, February 13, 2012 4:23 PM
To Next Page
Loading...
