36 Connecting to Computers, USB Devices, and Other Equipment
4. If the projector is connected to a storage device (and not
connected to another image source), the Slideshow program
appears.
If you are connected to another image source, press the
USB
button on the remote control to go to the Slideshow program.
5. See page 80 for instructions on controlling the slideshow.
6. When you’re finished, press
Esc and select Exit to exit the
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector. Failure to do so may damage
the device and/or the projector.
To Next Page
Loading...
