Epson BrightLink 455Wi - Selecting an Image Source; Adjusting the Image; Focusing the Image; Adjusting Brightness, Contrast, and Color

Displaying and Adjusting the Image 41
Selecting an Image Source
You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don’t see the image you want, press the
Source Search button
on the remote control or the projector until you see the image you
want to project. Or, press one of the Source buttons on the remote
control (
Computer, Video, USB, or LAN).
If you still can’t see an image or can’t project the same image that is on
your notebook or computer screen, see page 140 for solutions.
Select
USB to project from a USB device or LAN to project over a
network. See page 80 for instructions.
Adjusting the Image
Once you see your image, you may need to make certain adjustments:
■ To focus the image, see page 42.
■ To quickly adjust the color, brightness, or contrast, see page 43.
■ To change the image aspect ratio, see page 44.
■ If you need to fine-tune the image and/or sound, see “Using the
Projector Menus” on page 83.
Source Search button
Source
buttons