112
3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status
light is on or flashing.
Note: Do not unplug the power cord while projecting or data on the whiteboard may be lost. If the
Auto Delete Saved Data setting is set to Retain in the Extended menu, you can select whether or
not to clear the data on the whiteboard when you turn off the projector.
Parent topic: Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Selecting the Language for the Projector Menus
If you want to view the projector's menus and messages in another language, you can change the
Language setting.
To Next Page
Loading...
