214
Parent topic: Using BrightLink with a Computer
Connecting to a Remote Computer
The remote desktop connection allows you to control a remote Windows computer from the projected
screen using the interactive pens or your finger. You can also add notes to the projected content.
You can use the remote desktop connection through wired LAN and wireless LAN. Connection speed
varies depending on the communication band of the network. Use a wired connection for the most stable
connection.
While the Remote Desktop connection screen is displayed, you cannot do the following:
• Select a different image source
• Use other interactive features
• Control the projector from the bottom toolbar
• Connect to multiple projectors
• Hear sound from the projector
• Use RD Gateway, RemoteFX, USB redirection, or audio transfer
Note: Make sure your computer is configured to be controlled remotely. See your computer manual for
details.
1. Connect your projector to a wired or wireless network.
2. Select the icon on the bottom toolbar and select Remote Desktop from the image source list.
To Next Page
Loading...
