243
• Check Connection tests the network connection.
Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote
control to highlight numbers or characters and press Enter to select them.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic: Selecting Whiteboard Settings
Scanning an Image into a Whiteboard Page
You can scan a document or image into a new page in whiteboard mode using a supported Epson all-in-
one printer connected to the control pad or to your network.
You cannot scan with the following:
• Standalone scanners
• Printers that have run out of ink or cannot print.
You cannot use the following scanning functions, even if they are available on your product:
• The scan button
• Partial document or image scanning
• Double-sided scanning with an Automatic Document Feeder (ADF)
• Scanning more than 10 pages at a time with the ADF
1. Place your original on the product for scanning.
Note: You can place up to 10 sheets in the ADF. If you want to scan a longer document, scan the
pages in batches of 10.
2. Select the Scan icon on the projector control toolbar and select Advanced.
To Next Page
Loading...
