272
Note: If you select Video, USB1, or USB2 as a source, you cannot use PC interactive mode.
• To reverse the left and right images, press the Menu button on the remote control and select
Swap Screens.
• To make one image larger, press the Menu button on the remote control, select Screen Size, and
select Larger Left or Larger Right.
• To align the images with the top of the screen, press the Menu button on the remote control,
select Align, and select Top.
• To outline the drawing area, press the Menu button, select Display Drawing Area, and select On.
5. To return to displaying one image, press the Split or Esc button on the remote control, or press the
Split Screen icon on the bottom toolbar and select Exit Split Screen.
You cannot perform the following operations during split screen projection:
• Menu settings
• E-Zoom
• Switching aspect mode
• User button operations
• Auto Iris
Selecting Interactive Split Screen Settings
Parent topic: Using the Interactive Features
Related references
Projector Setup Settings - Extended Menu
Selecting Interactive Split Screen Settings
You can select split screen projection settings using the projector control toolbar.
1. Select the Split icon on the projector control toolbar.
2. Select the input sources for the left and right screen.
3. Select Switch Source.
4. Select the Split icon on the projector control toolbar again.
To Next Page
Loading...
