271
You see a screen like this:
2. Select the two sources you want to display, keeping the following in mind:
• Not all combinations of sources are valid.
• If you want to write on a blank screen, select any unused source.
• Unused sources display the color selected in the Display Background setting.
• The Logo option will display a blue background.
3. Press the Switch Source button to display the two sources.
4. Do any of the following as necessary:
• To change to a different source at any time, press the Menu button on the remote control and
select Source, or select the Split icon on the projector control toolbar.
• To annotate on the right screen, press the Menu button on the remote control, select Target Pen
Mode, and select Screen Right. Set the Pen Mode setting to PC Free Annotation.
• To use PC interactive mode on the right screen, press the Menu button on the remote control,
select Target Pen Mode, and select Screen Right. Set the Pen Mode setting to PC Interactive.
To Next Page
Loading...
