87
Selecting Screen Mirroring Settings
You can select Screen Mirroring settings for your projector and then project images from your mobile
device.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select On as the Screen Mirroring setting.
4. Select Screen Mirroring Settings and press Enter.
5. To enter a name for the projector, select Display Name. You can enter up to 32 alphanumeric
characters.
6. Select Basic or Extended as the Operation Mode setting.
7. Select Basic and select these settings as necessary:
• Wireless LAN Sys. lets you select the type of wireless LAN system the projector is connected to.
• Adjust Image Quality lets you adjust the screen mirroring speed/quality. Select a small number
to improve the quality and select a large number to increase the speed.
• Connection Mode lets you select the type of WPS (Wi-Fi Protected Setup) you are using.
To Next Page
Loading...
