138
Note: You can change the PC Free operation options or add special effects by highlighting Option at the
bottom of the screen and pressing Enter.
Note: You can also use the interactive pen or your finger to operate the slide show.
1. Press the Source Search button on the projector, remote control, or Control Pad, or tap the Source
Select icon on the whiteboard.
2. Select the USB1 source.
The PC Free screen appears.
Note: If the Select Drive screen appears, press the arrow buttons to select the drive and press
Enter.
3. Do the following as necessary to locate your files:
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight
the folder and press the Enter button.
• To move back up a folder level on your device, highlight Back to Top and press Enter.
To Next Page
Loading...
