266
Switches to computer interactive mode.
• Select , then select to switch to computer interactive mode
• Select , then select to switch back to built-in annotation mode
If the icon is not displayed, set the Pen Mode Icon setting to On in the projector's
Extended menu. You can also switch to computer interactive mode by pressing the Pen
Mode button on the remote control.
Splits the screen and displays the whiteboard source and another source. To switch to the
other source, tap and drag the icon all the way across the screen.
To enlarge one image while reducing the other, tap and drag the tab.
Allows the pen or finger to be used as a mouse
Undoes the last annotation
Redoes the last undo
Changes custom pen or highlighter color and width
Writes or draws free-form lines with custom pen
To Next Page
Loading...
