Epson C11CA31021NU Administrator's Guide

28
Preparation
8
Use the ▲/▼/ buttons to enter the default gateway, and press the button.
9
When the change setting confirmation message (“Change network settings?”) appears,
press the button.
• If necessary, set the Jumbo Frame. (“Top menu” - “Network” - “Change Settings” - “JUMBO
FRAME”) In the initial state, Jumbo Frame is set to off.
• If [Receiving job Cannot proceed] appears on the LCD, wait until job processing is finished
and then try again.
Default gateway
XXX. XXX. XXX. XXX
Change network
settings?

Epson C11CA31021NU Specifications

General

Brand	Epson
Model	C11CA31021NU
Category	Computer Hardware
Language	English