Epson C11CF39403 Network Guide

Connection
This chapter explains the environment or procedure to connect the printer to the network.
Connecting to the Network
Connecting to LAN
Connect the printer to the network by Ethernet.
Related Information
& “Connecting to the Network Using the Installer” on page 18
Assigning an IP Address Using EpsonNet Config
Assign an IP address to the printer using EpsonNet Config.
A
Turn on the printer.
B
Connect the printer to the network using an Ethernet cable.
C
Start EpsonNet Config.
A list of the printers on the network is displayed. It may take a while before they are displayed.
D
Double-click the printer that you want to assign to.
If you connect the printer to a network with an available DHCP function, the IP address is assigned using the
DHCP function, and then
is displayed.
Note:
❏ If you have connected multiple printers of the same model, you can identify the printer using the MAC address.
❏ After the printer is connected to the network, you can change the IP address assignment method.
Network Guide
Connection
14

Epson C11CF39403 Specifications

General

Brand	Epson
Model	C11CF39403
Category	Printer
Language	English