EasyManuals Logo

Epson C11CF39403 Network Guide

Epson C11CF39403
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Messages Cause/What to do
Invalid file.
Cause:
You are not importing a certificate file in X509 format.
What to do:
For more information on the certificate, see the website of the certificate authority.
Cause:
The file you have imported is too large. The maximum file size is 5KB.
What to do:
If you select the correct file, the certificate might be corrupted or fabricated.
Cause:
The chain contained in the certificate is invalid.
What to do:
For more information on the certificate, see the website of the certificate authority.
Cannot use the Server Certificates that
include more than three CA
certificates.
Cause:
The certificate file in PKCS#12 format contains more than 3 CA certificates.
What to do:
Import each certificate as converting from PKCS#12 format to PEM format, or import
the certificate file in PKCS#12 format that contains up to 2 CA certificates.
The certificate has expired. Check if the
certificate is valid, or check the date
and time on your printer.
Cause:
The certificate is out of date.
What to do:
If the certificate is out of date, obtain and import the new certificate.
If the certificate is not out of date, make sure the printer's date and time are set
correctly.
Private key is required.
Cause:
There is no paired private key with the certificate.
What to do:
If the certificate is the PEM/DER format and it is obtained from a CSR using a
computer, specify the private key file.
If the certificate is the PKCS#12 format and it is obtained from a CSR using a
computer, create a file that contains the private key.
Cause:
You have re-imported the PEM/DER certificate obtained from a CSR using Web Config.
What to do:
If the certificate is the PEM/DER format and it is obtained from a CSR using Web Config,
you can only import it once.
Setup failed.
Cause:
Cannot finish the configuration because the communication between the printer and
computer failed or the file cannot be read by some errors.
What to do:
After checking the specified file and communication, import the file again.
Network Guide
Solving Problems
58

Table of Contents

Other manuals for Epson C11CF39403

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson C11CF39403 and is the answer not in the manual?

Epson C11CF39403 Specifications

General IconGeneral
BrandEpson
ModelC11CF39403
CategoryPrinter
LanguageEnglish

Related product manuals