Options and Consumables
5-5
Cut-Sheet Feeder
The optional cut-sheet feeder C80683
✽
gives you easier and more
efficient handling of single-sheet paper, single-sheet multipart
forms, envelopes, and postcards. You can use the cut-sheet feeder
without removing continuous paper.
You can load the following quantities of paper to the cut-sheet
feeder:
Note:
You cannot install the cut-sheet feeder and optional automatic sheet
alignment unit at the same time.
Installing the cut-sheet feeder
Follow these steps to install the cut-sheet feeder:
1. Make sure that the printer is turned off.
Single sheets
A3 size paper Up to 130 sheets of 82 g/m² (22 lb) paper
Up to 170 sheets of 64 g/m² (17 lb) paper
Other paper Up to 200 sheets of 82 g/m² (22 lb) paper
Up to 250 sheets of 64 g/m² (17 lb) paper
Single-sheet
multipart forms
Up to 40 sheets of 47 g/m² (12.5 lb) paper
Envelopes Up to 20 plain or bond envelopes
Up to 30 airmail envelopes
Postcards Up to 50 plain paper cards
To Next Page
Loading...
