1-34
Paper Handling
3. Select Card on the control panel by pressing the Tear
Off/Special Paper button.
4. Load cards following the instructions in “Loading single
sheets from the front” on page 1-18, “Loading paper to the
cut-sheet feeder” on page 5-8, or “Loading paper using the
automatic sheet alignment unit” on page 5-16.
from the paper guide
Switching Between Continuous Paper and
Single Sheets
When using the tractor, you can easily switch between continuous
paper and single sheets (including envelopes or postcards)
without removing the continuous paper from the tractor.
Switching to single sheets
Follow these steps to switch from continuous paper to single
sheets:
To Next Page
Loading...
