Epson DLQ-3500 - Continuous Forms with Labels

Paper Handling
1-27
Continuous forms with labels
The continuous forms with labels is a type of continuous paper
with one label on each page. This is different from label paper,
which consists entirely of labels. When printing on this type of
paper, the printer must adjust the height of the print head for the
extra thickness of the labels.
Follow these steps to load continuous forms with labels:
c
Caution:
Use continuous forms with labels only under normal operating
conditions.
1. Make sure of the following:
❏
Your software settings keep the printing entirely within
the printable area. See “Printable area” on page A-24 for
more information.
❏ Tractor is selected as the paper source on the control
panel.
2. Turn on Overlapping Forms and Skip over perforation
settings in the default-setting mode.
Note:
When Overlapping Forms is turned on in the default-setting
mode, the printer automatically activates the auto paper thickness
function even though the paper-thickness lever may be set to another
position.