A-16
Product Information
❏
The thickness of the folded part when extended should be 2
mm or less.
* 2 mm or less
❏
The binding area should be flat and have no creases.
❏
The sprocket holes of all sheets in the form should be aligned
properly.
❏
The binding position should be outside the printable area. See
“Printable area” on page A-24 for more information.
Labels
❏
Labels should be securely attached to the backing sheet and
the label surface must be flat.
❏
The labels should not peel off their backing sheet under the
conditions below.
1. label
2. 27 mm
wrapping drum radius
wrapping angle
wrapping time
ambient temperature
ambient humidity
27 mm
180°
24 hours
40°C
30%
2
1
To Next Page
Loading...
