Product Information
A-21
Overlapping multipart forms with labels
The specifications for the overlapping multipart forms with labels
are the same as those for labels except for the following items:
Area measurements
A 17 ± 3 mm (0.15 ± 0.12 inch)
B 13.3 mm (0.52 inch) or less
C from perforation to the top of the next overlapping form:
3.3 mm (0.13 inch) or more
D from perforation to the bottom edge of the glue point area:
17 mm (0.67 inch) or less
E total thickness including glue point dilation:
0.7 mm (0.026 inch) or less
To Next Page
Loading...
