Paper Handling
1-25
❏
The auto tear-off function is turned off in the
default-setting mode.
❏
If you use labels whose backing sheet is exposed, make
sure the paper-thickness lever is not set to AUTO. Set it to
the appropriate position. See “Adjusting the
Paper-Thickness Lever” on page 1-5 for more
information.
2. Load labels as described in “Loading continuous paper with
the tractor” on page 1-9.
To tear off and eject labels
Always tear off and eject labels as described below.
c
Caution:
Never feed labels backward using the Load/Eject button, Tear
Off/Special Paper button, or knob on the right side of the
printer. Labels can easily peel off their backing and jam the
printer.
To Next Page
Loading...
