2-14
Printer Software
Note:
If you install the driver using Add Printer in the Printers folder, or using
the “Point and Print” method, EPSON Status Monitor 3 may not
function properly. If you want to use EPSON Status Monitor 3, reinstall
the driver as described in the Setup Guide.
Before using the EPSON Status Monitor 3 utility, be sure to read
the README file on the driver disk. This file contains the latest
information on the utility.
Setting up EPSON Status Monitor 3
Follow these steps to set up EPSON Status Monitor 3:
1. Open the Utility menu as described in Using the Printer
Driver with Windows Me, 98, and 95 or Using the Printer
Driver with Windows 2000 and NT 4.0.
To Next Page
Loading...
