Epson DM D110 - Page 64

64
Chapter 2 Setup
2
Attaching on the counter
1
Attach the affixing tapes on the back of the fixing plate A.
(When using screws to attach it on the counter, you do not have to attach the affixing
tapes.)
2
Pass the cable for this product through support C and attach support C to this
product. When using support B for extension, insert the tab on support B into the
hole on support C until you feel it click.
• The illustrations used here are for DM-D110, but you can still use them as your reference for
DM-D210.
• Because the illustration used here is for the RS-232/USB model, there are 2 cables. The USB
model and RS-232 model have 1 cable.
When using support
B for extension