Projecting image and movie files
54
C
Select "Slideshow" from the bottom of the screen
by tilting the [h] button on the remote control, then
press the [Enter] button.
The Slideshow will be performed and the image and movie files in
the folder will be projected in sequence one at a time.
When the last file is projected, the file list will be displayed again
automatically. If you set "Continuous Play" to "ON" in the Options
window, projection will start from the beginning again when the end
is reached. s p.55
Just as with a scenario, you can proceed to the next screen, return
to the previous screen, or stop playback during projection of a
Slideshow.
s
"Operating During a Presentation" p.51
q
If the screen switching time setting has been set to "No",
the files will not change automatically when you run a
Slideshow. Press the [Enter] or [
]
] button on the remote
control to continue to the next file.
To Next Page
Loading...
