d
Press the [Menu] button to finish making settings.
a
Auto Iris can be set only when the Color Mode is Dynamic,
Theatre, or Customized.
Changing the Aspect Ratio of the Projected Image
Change the aspect ratio
g
when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the aspect ratio when projecting
computer images at full size.
Available Aspect Modes vary depending on the image signal currently being
projected.
The changing methods and the types of Aspect Modes are as follows.
Changing methods
Each time you press the [Aspect] button, the Aspect Mode name is
displayed on the screen and the aspect ratio changes.
Remote control
a
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.81
Changing the aspect ratio for images from video equipment or
from the HDMI port
For EB-1776W/EB-1771W/EB-1761W
Each time the button is pressed, the aspect ratio changes in the order of
Normal or Auto, 16:9, Full, Zoom, and Native.
A
Normal or Auto
B
16:9
C
Full
D
Zoom
E
Native
For EB-1751
Each time the button is pressed, the aspect ratio changes in the order Auto
(only when the input source is HDMI), 4:3, and 16:9.
Adjusting Projected Images
45
To Next Page
Loading...
Need help?
General
