Automatically Adjust to Fit into the Screen Frame
- Screen Fit - (EB-1776W only)
Screen Fit is a function that corrects the projected image so that it fits to
the frame (border) of the screen, whiteboard, and so on. When you press
the [Screen Fit] button on the remote control or control panel, the
projected image is adjusted to fit the frame of the screen while also
performing keystone correction and focus adjustments.
You can use Screen Fit to correct the projected image under the following
conditions.
Screen size: less than or equal to 100"
Distance between projector and screen: approx. 1.0 to 2.5 m
Correction angle: approx. 20˚ right and left/approx. 30˚ up and down
a
• The projected image cannot be adjusted correctly if this range is
exceeded. Correct the projected image manually.
• Screen Fit is unavailable when the projector is suspended from a
ceiling. Correct the projected image manually.
a
Press the [Screen Fit] button on the remote control or the control
panel during projection.
Using the remote control Using the control panel
Adjusting Projected Images
35
To Next Page
Loading...
Need help?
General
