Epson EB-1761W User Manual

Submenu Function
Standby Mode
You can use network monitoring and control functions
while the projector is in standby mode when this is set to
Communication On. (EB-1776W/EB-1771W/EB-1761W
only)
You can monitor and control the status of the projector
over the network by using
SNMP g , or by using the
EasyMP Monitor software.
s "Useful Software" p.120
USB Type B
Set to USB Display when the projector and a computer are
connected by a USB cable and computer images and audio
are projected.
s "Projecting with USB Display" p.31
When set to Link21L, ESC/VP21 commands are enabled.
s "ESC/VP21 Commands" p.126
Projector ID
Set the ID to a number between 1 and 9. Off indicates that
no ID is set.
s "Setting the Projector ID" p.66
Multi-screen
You can adjust the hue and brightness of each projected
image when multiple projectors are lined up and projecting.
Adjustment Level: You can adjust from black to white in
five stages called Level 1 to 5, and in each of these 5 levels,
you can adjust Brightness Correct. and Color Correct.
Brightness Correct.: You can correct the difference in the
brightness of each projector.
Color Correct. (G/R) / Color Correct. (B/Y): You can
correct the difference in the color of each projector.
s "Correcting the Color Difference when Projecting from
Multiple Projectors" p.65
Language
You can set the language for messages and menus.
Submenu Function
Reset
You can reset the adjustment values for Display
*1
and
Operation
*2
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.94
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.71
*2 Except for High Altitude Mode.
List of Functions
85

Epson EB-1761W Specifications

General

Brand	Epson
Model	EB-1761W
Category	Projector
Language	English