Base (without Slide Plate)
Name Function
A
Ceiling mount fixing
points
(four points)
Connect the ceiling mount fixing points to a commercially
available ceiling mount or wall mount when mounting the
projector to a ceiling or wall. For details, see the
documentation supplied with the the ceiling mount or
wall mount.
B
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
Control panel
Name Function
A
[t] button
Turns the projector power on or off.
s Quick Start Guide
B
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.94
C
[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.21
D
[Enter] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level. s p.73
Part Names and Functions
15
To Next Page
Loading...
